 |
S.A.B. Technology s.r.o. -
výrobce schodolezů CLIMBER 1
S.A.B. Technology s.r.o. - výrobce schodolezů CLIMBER 1
|
|
ID Datové schránky: 4ajyst7 |
S.A.B. Technology
s.r.o. Vodni 342/5 , 737 01 Cesky Tesin Czech republic
USER GUIDE - stairway CLIMBER MK 3
- of mobile belt attended facility for overcoming the architectonic barriers for immobile persons producer: S.A.B. Technology s.r.o. This guide serves as guarantee certificate therefore save it including the proof of purchase
· Facility characteristic Stairway CLIMBER 1 is determined to transit of clients on a mechanical wheelchair down and up to stairs. It is characterized by high quality and utility value at keeping the maximal simplicity and easy attendance. Czech designers have given big emphasis at development on safeness while using. It is assured massive and robust construction at keeping the minimal outside dimensions. · Orientation describtion of parts of climber
1. rudder of CLIMBER 2. variable support of head 3. variable holders for mechanical wheelchair 4. switch of movement – down, up and lock safety buton 5. holders for wheels of mechanical wheelchair 6. top cover 7. wheels for easy manipulation on flat surface 8. connector for battery charging 9. line adapter 12 V with end piece 10. point of inclination of CLIMBER 11. lever system for fixation the rudder to gear 12. switch of run without rudder 13. switch of turning-on of CLIMBER or charging the accumulator 14. indicator of battery status
¨ stairway CLIMBER is determined to using by persons who are trained by the supplier´s or producer´s staff ¨ persons who are younger than 15 years old can´t use the facility ¨ don´t use the facility on slippery or wet stairs or on incompact surface (broken stairs, stairs covered with carpet which isn´t firm fixed etc.) ¨ before running the CLIMBER with user check the safety locking the wheelchair with user and general stability of CLIMBER with user (gravity centre) on horizontal surface ¨ at transit of person on clear horizontal surface is recommended to switch to run of CLIMBER without belts (wheel working) ¨ maximal enabled inclination is indicated by the inclinometer ¨ cross slope of path has to be 0 degrees (i. e. out of inclination of transported person on the right or on the left) ¨ don´t use the CLIMBER on spiral stair ¨ maximal loading kapacity is 130 kg (see label) ¨ continuous running with on-load is guaranteed for a period of 30 minutes with fully charged battery ¨ the facility is determined to transfer of persons on mechanical wheelchair ¨ is prohibited to transfer of goods, wares, appliances and persons without mechanical wheelchair ¨ is prohibited to transfer of person on electrical wheelchair
· Important information for users § after take-over the facility read this guide carefully and respect the mentioned instructions § for using with more kinds of wheelchairs it is always necessary to set the separate holders for individual wheelchair by seller´s or producer´s trained person § is prohibited to govern, unprofessionally repair or interfere in the facility without authorization. hese activities can be provided only by supplier´s skilled specialist. § don´t expose the battery to extreme temperature ups downs § 12V battery charger which is placed outside of CLIMBER is determined to provision the regular charging the battery with emphasis on maximal economy. § don´t use other type of charger than supplied by producer! § after usability light signalling (the green indicator lights on charger) you can finis the battery charging by change the position of switch and removal the charger connector from CLIMBER § for reach the maximal battery capacity (thereby elongation the time of usable of CLIMBER) we recommend that continue in charging for next 12 hours after this signalization § the filler of battery consists of dangerous substance to health. ATTENTION! Don´t open or don´t intervene into the battery! In the event of some problem call undermentioned assistance: SOS – TECHNICAL SUPPORT +420 604 687 730 warranter of service: HORIZONT-NARE s.r.o.
Information for users 1. starting the down-up to stairs Insert the key to switch of turning (13) and turn it clockwise. You can´t use the CLIMBER without activation by the key. 2. possibility of manipulation with the climber on horizontal pace The side wheels serve to easy movement on horizontal pace (7). The wheels provide physical undemanding facility manipulation with transfered person. Incline the rudder slight and thereby the whole CLIMBER on, the CLIMBER belts come loose from floor. And you can tamper with CLIMBER by wheels. You can work with the CLIMBER together with transfered person. After backward deflection of rubber and thereby the whole CLIMBER apart, the belts of CLIMBER touch the floor. Herewith you obtain the possibility to use the motor drive. At the movement on stairs the side wheels imitate the stairs and don´t obstruct the belt mechanism. Overcome the appropriate obstructions outsider stairs by backward running of CLIMBER! 3. connection both of parts of climber Stairway CLIMBER consists of 2 parts – so-called gear and rudder. Both rudder and gear you have to connect safely before using. After using is possible to unconnect the CLIMBER and transport it e. g. by car.
How to connect the rudder to gear: a) Stand up face to back of gear. b) Handle the rubber and push in it into the socket of gear carefully. c) Incline the rubber on to reach the lock-on of lever system (11). d) Check if it is impossible to divert the rudder from you. e) Turn the key of switch (13) clockwise. f) Press the switch of movement on rudder. In case the facility doesn´t go, check the following: 1. If the battery status indicator lights: a) if the red diodes light, charge the battery by supplied charger b) if it doesn´t light at all, call your seller or above - mentioned service warranter. 2. If the lock safety button isn´t blocked – turn the buton.
How to disconnect the rudder and the gear: a) We recommend to turn off the switch of CLIMBER (13) and take out the key from switch. b) Stand up face to back of gear. c) Insert your leg under the back of gear. Lean your heel to floor. Insert your tip-toe between the axe of upper wheels and lever system (11). d) Press down by your tip-toe on the lever (11) slightly. e) Divert the rudder from you. f) Take out the rudder from grip socket and take out it from the gear.
4. HOW TO USE THE CLIMBER TO OVERCOME THE BARRIERS
A) How to connect safely transported person on mechanical wheelchair to CLIMBER: 1) Drive with the complete CLIMBER under the lower part of mechanical wheelchair. The wheels of mechanical wheelchair have to be broken. 2) Stand up face to back of gear. 3) Insert your leg under the back of gear. Lean your heel to floor. Insert your tip-toe between the axe of upper wheels and lever system (11). 4) Press down by your tip-toe on the lever (11) slightly. 5) Divert the rudder from you. 6) Fix both holders for mechanical wheelchair to rudder in agreement with the points 7) and 8). 7) Extend and safeguard the spring breaker, set the pitch of the holders according to inside range of hadles of wheelchair. 8) Drive with the wheelchair above the holders and leave off the spring breaker to attach the wheelchair. The holders safe the addition the construction of wheelchair to rudder. 9) Fix the safety belt to effect the safety of transported person. 10) Inclinate the rudder with transported person on. You can help yourself by lean your leg on axe of top of wheelchair. The lever of lever system (11) have to click.
B) How to disconnect transported person on mechanical wheelchair from CLIMBER: 1) Stop on flat surface where is enough place. 2) Stand up face to back of gear. 3) Insert your leg under the back of gear. Lean your heel to floor. Insert your tip-toe between the axe of upper wheels and lever system (11). 4) Press down by your tip-toe on the lever (11) slightly. 5) Divert the rudder from you to tip the wheelchair get on wheel again. You can insert your tip-toe between the axe of upper wheels and lever system (11) for reach better stability. 6) Loosen the safety belt. 7) Lock off the holders, loosen the wheelchair from rudder and unbrake the breaks of mechanical wheelchair. 8) Connect the rudder to CLIMBER again and go out with the CLIMBER from under of wheelchair.
C) Movement with the CLIMBER up the stairs: 1) Fix the wheelchair with transported person to CLIMBER – according the paragraph A. 2) Drive by back stroke of CLIMBER to stair. (The rudder of facility is towards to stairs, operator stand back to stair.) 3) Press the button of up movement (arrow on) and hold it. 4) During climbing check the inclination of both CLIMBER and transfered person too. 5) In the event of some pressure let the button of movement or press the red lock safety button which is placed next to buttons of movement. 6) After climb of CLIMBER to point of inclination of CLIMBER (which is marked on CLIMBER) fall the whole CLIMBER towards to you and go away to flat surface to prepare transfered person enough place to loose from CLIMBER. 7) Disconnect transported person from CLIMBER – according the paragraph B.
D) Movement with the CLIMBER downstairs: 1) Fix the wheelchair with transported person to CLIMBER – according the paragraph A. 2) Drive by run forwards of CLIMBER to stair to point of inclination of CLIMBER (which is marked on CLIMBER). 3) Fall the whole CLIMBER apart from you to reach the top of stair. 4) Press the button of down movement (arrow apart from you). 5) During falling check the inclination of both CLIMBER and transfered person too. 6) In the event of some pressure let the button of movement or press the red lock safety button which is placed next to buttons of movement. 7) After reach the flat surface under the stair disconnect transported person from CLIMBER – according the paragraph B.
5. battery charging The charger 12 V is placed outsider from CLIMBER for safety reasons. It is necessary for charging to connect the charger (9) into plug 220 V and connect the connector to outlet of CLIMBER (8). Then turn the switch with key (13) anticlockwise. In the event the red indicator lights on charger the battery is charged. In case the green indicator lights on charger it is necessary to break the charging and use the CLIMBER after disconnect the charger connector and change-over the swicht (13). We warn if the switch is on charging possition you can´t use the CLIMBER for safety reasons!
6. current maintenance Model CLIMBER 1 is nearly maintenance-free, check the CLIMBER according the following regularly: CLIMBER: § Check visually the relevant mechanical damage regularly – in the event of any presence or suspicion for presence call your seller or service warranter. § Check the state of belts – in the event of damage or marked abrasion call your seller or service warranter. § Keep the CLIMBER cleanness. § Deal with the CLIMBER econnomize – you raise its lifetime! The battery and electric connection: § Check the battery charge status regularly. If the operation time of CLIMBER isn´t in terms of warranted value at battery charged statusy contact your seller or service warranter. § In case the CLIMBER isn´t used for a longer time it is necessary to charge the battery once a month regularly. Otherwise come to devaluation of battery. § Don´t intervene in electricity distribution of CLIMBER of itself. In the event of appropriate trouble or damage call your seller or service warranter.
7. guarantee and regular after-guarantee maintenance inspection The guarantee hasn´t respect if some trouble thrust by reason of using the CLIMBER by other method than is noted in this instruction guide.
24-months warranty. Is necessary to do the regular yearly service to ensure failure free and safe facility operation. This service ensures the service warranter – HORIZONT-NARE s.r.o. company.
The spending on regular after-guarantee sevice are at expense of user. Please contact the service warranter – HORIZONT-NARE s.r.o. company, phone no.:
REGULAR AFTER-GUARANTEE SERVICE +420 596 891 012, +420 604 687 730 service warranter: HORIZONT-NARE s.r.o.
8. ESTABLISHED INTERVALS OF REGULAR GUARANTEE AND AFTER-GUARANTEE SERVICE
9. repairs under guarantee note
10. your climber specifications THE TYPE OF CLIMBER : CLIMBER 1 MODEL VERSION : MK 1
SERIAL NUMBER :
THE DELIVERY DATE :
SELLER´S RUBBER STAMP AND SIGNATURE:
11. COMPLETION CERTIFICATE ABOUT TENDER TRAINING The seller and buyer declare that persons undermentioned in list of trained person confirm by their signatures that they were informed about the operation and maintanance and technical characteristics of CLIMBER. These persons obtain the title to operate the CLIMBER MK 1.
Trained persons list
First and the last name: The number of identity card: Signature .................................................................................................................................................................. The date and place of training:
12. buyer data First and the last name of buyer (trade name):
Buyer´s comments on appropriate deficiencies, miskateks or incorrectly delivered parts of facility (in accordance with buyer´s requirements): ………………………………………………………………………………………………….. …………………………………………………………………………………………………… Buyer by his signature (legal person by rubber stamp of company) confirm taking over the flawles CLIMBER and test it. Buyer (or legal person) confirm tender training and instruction that seller or producer don´t account for damage to health or properte in the event of loss of this instruction guide - guarantee certificate The facility is property of supplier until payment in full including VAT.
In……………………………………..
The signature of buyer´s: The signature and rubber stamp of seller:
stairway CLIMBER MK1 - of mobile belt facility attended for overcoming the architectonic barriers for immobile persons producer: S.A.B. Technology s.r.o. Vodni 342/5 , 737 01 Cesky Tesin Czech republic
|
Zprávu elektronické pošty s dotazy na naše výrobky nebo komentářem k tomuto
webovému serveru zašlete na adresu
webmaster@sabtechnology.cz
nebo info@sabtechnology.cz.
|
